Manitowoc Welbilt Indigo NXT QuietQube Manual page 161

Indigo NXT Ice Machine Troubleshooting Tips
Water Level Probe Diagnostics
Step 4 – Unplug the probe from the board and pull the water level
probe out of its mount. Ohm out from the connector to the three
probes.
• Red wire to short probe = 0 ohms.
• Black wire to both long probes = 0 ohms to only one of the long
probes and infinity to the other long probe.
• White wire to the probe that showed infinity to the black wire
should now show 0 ohms.
With Continuity DO NOT Change Probe!
Without Continuity, the Probe is Defective
161
© Welbilt, Inc.