Manitowoc Welbilt Indigo NXT QuietQube Manual page 154

Indigo NXT Ice Machine Troubleshooting Tips
Water Level Probe Diagnostics
The water level probe controls the water level by sensing whether water is or is not
contacting the water level probe. There are three sensing probes. Two probes are
equal in length and are used to measure conductivity for diagnostics, ice clarity
and water miser options. Factory default settings measure resistance from both
long probes to the short probe.
• When in the default or factory setting the Resistance level is
taken at BC and continues to fill to level "A".
The height of Probe
A is the level of
water needed to
make ice under
normal conditions
A B C
(Ref)
B and C Probes
are at the same
height to measure
Conductivity for
Diagnosis, Water
Miser and Ice
Clarity Options.
154
© Welbilt, Inc.