Manitowoc Welbilt Indigo NXT QuietQube Manual page 14

INDIGO NXT
Rotary Refrigeration System (Liquid Charging)
HEAT
EXCHANGER
DRIER
If no liquid line access is available (drier), install one into the liquid process tube
before recharging the ice machine.
HIGH PRESSURE VAPOR
THERMOSTATIC
COMPRESSOR
T2
Receiver
(Water Cooled Only)
HIGH PRESSURE LIQUID
Rotary Compressor Third Port Liquid
Charging:
• Damage may occur when
charging liquid into the front
EXPANSION
VALVE
discharge line service access port.
HARVEST VALVE
• It is recommended that all Liquid
charging should be done through
X
the Liquid Line service access.
• Replacement driers will have a
Schrader built into the inlet.
LOW PRESSURE LIQUID
EVAPORATOR
T4
T3
CONDENSER
T1
LOW PRESSURE VAPOR
14
© Welbilt, Inc.