Indigo NXT Ice Machine Troubleshooting Tips
Water Level Probe Diagnostics
• Intermittent Water faults
• Connector on wiring harness that goes to the board
has loose female terminals. In this particular case, the
female connector was loose and would not make
connection with the male connector from the water
level probe.
• This female connection was to loose and would not
make good connection with the male connector. It
has already been repaired prior to photo.
NOTE: If the high water level probe completes the circuit with the
Low Water Level probe open, the ice machine is programed to initiate
harvest.
163
© Welbilt, Inc.