Table of Contents
Advertisement
Installation Manual
NU-Series Hardware
When there is a conflict between the NISM system setup and the power supply type, then
the NISM2 power LED flashes red.
Legend:
(1) Power Indicator LED
5.3.6 Connecting a Paging System
Use either of the RS232 COM ports (COM1 and COM2) to connect ESPA or TAP paging
systems. Support for a TAP or an ESPA paging system requires a license.
Legend:
(1) COM1 or COM2
You must select the type of paging system protocol in the NISM Advanced Configuration
page of the System Manager. The paging system protocol selection is located under
"Paging", as shown in the following figure.
P/N PM000223A • Rev. 1 • ISS 9 August 2017
IP Devices
Figure 30 NISM power indicator LED
Figure 31 Connecting a paging system to a COM port
38
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the NU Series and is the answer not in the manual?
Questions and answers