Chap5.doc 116 Thu Jul 25 10:24:29 1996
Figure 41
Field Replaceable Units
FRU Removal and Replacement
Optional EGRAM Module
Before removing the optional EGRAM (System
Graphics RAM) module, perform the following proce-
dures:
Remove the Main Tray Assembly from the system
•
unit.
•
Remove the Storage Tray Assembly from the Main Tray
Assembly.
•
Remove the CPU board assembly from the Main Tray.
Perform the following procedure to remove the
EGRAM module:
1 To release the EGRAM module from the standoffs, use a
pair of needle-nose pliers to squeeze the tabs on the
standoffs while lifting the corner of the EGRAM module
slightly, as shown in Figure 41.
Removing the Optional EGRAM Module
116