Removing The Cpu Board - HP Visualize b160L Supplementary Manual

Chap5.doc 115 Thu Jul 25 10:24:29 1996
Figure 40
NOTICE:

Removing the CPU Board

Perform the following steps to remove the CPU board
from the main tray:
1 Pull the two ejector handles at the same time, as shown
in Figure 40.

Removing the CPU Board

2 Slide the CPU board out of the main tray.
Before installing a CPU board assembly, swing the
card ejectors out to the fully open position. After
sliding the CPU assembly into place, push firmly
on the ejector handles to fully seat the CPU board
connector in the backplane.
Field Replaceable Units
FRU Removal and Replacement
115