Scanner And Paper Cassette Assembly - Ricoh FAX680MP Service Manual

SCANNER AND PAPER CASSETTE

6.3.2 SCANNER AND PAPER CASSETTE ASSEMBLY

[B]
[E]
1. Remove the top cover assembly (see section 1.1), the inner cover (see section
1.2), and the rear cover (see section 1.3).
2. Remove the bottom cover assembly with the FCU and the NCU (see section
2.1).
3. Remove the scanner and the paper cassette assembly [A] (2 screws).
NOTE: When replacing the assembly, make sure of the following:
• The pin [B] must go into the guide [C] correctly.
• The positioning plates [D] must go into the guides [E].
• The frame must sit correctly on the positioning pins.
NOTE: Clean the paper feed rollers and cork pads on the cassette bottom plate
using alcohol whenever the assembly has been removed from the
machine.
[E]
[C]
[D]
H905R516.cdr
6-10
31 March, 1997
[D]
[A]