Table of Contents
Advertisement
PCBs
6.2.2 PSU AND PCIF
1. Remove the rear cover (see section 1.3).
2. Remove the bottom cover assembly with the FCU and the NCU (see section
2.1). If possible, instead of doing this, disconnect the harnesses from CN1,
CN9, and CN15.
3. Remove the PSU/PCIF assembly [A] (2 screws).
4. Remove the PCIF [B] from the PSU assembly (4 screws and 2 hexagonal
screws for the serial interface).
[B]
H905R513.cdr
6-8
31 March, 1997
[A]
Advertisement
Table of Contents
