Table of Contents
Advertisement
ERROR CODES
CODE
MEANING
1-34
No paper after printing
is completed.
1-50
Print module error
during reception.
1-51
Print module error
during copying.
1-71
Top cover was open
during printing.
2-10
The modem can not
enter the receiving
condition.
2-12
The clock can not be
generated while data is
transmitted from the
modem.
2-00
FCU over-run.
2-20
Compression cannot
be started.
2-21
Memory overflow
during reception.
ACTION
•
Add paper.
•
If the problem is present after adding paper,
replace the paper end sensor or FCU.
•
Reset the print module using the "RESET"
key.
•
Turn off the machine and turn it back on.
•
If the problem still exists, check the flat cables
connections from the printer engine to the
FCU.
•
Replace the printer engine or FCU.
•
Reset the print module using the "RESET"
key.
•
Turn off the machine and turn it back on.
•
If the problem still exists, check the flat cables
connections from the printer engine to the
FCU.
•
Replace the printer engine or FCU.
•
Close the top cover.
•
If the problem still exists, replace the OPU.
•
Turn off the machine and turn it back on.
•
If the problem still exists, replace the FCU.
•
Turn off the machine and turn it back on.
•
If the problem still exists, replace the FCU.
•
Turn off the machine and turn it back on.
•
If the problem still exists, replace the FCU.
•
Turn off the machine and turn it back on.
•
If the problem still exists, replace the FCU.
•
Erase files from the memory.
•
If the memory overflowed due to paper end,
ink end, color ink installed, or printing from a
host computer, fix the problem so that the
machine can start printing.
•
Install optional memory if it is not installed.
7-10
31 March, 1997
Advertisement
Table of Contents
