Table of Contents
Advertisement
BIT SWITCHES
BIT SWITCH 9
Bit
Function
0
Dial tone detection
0: Disabled
1: Enabled
1
Busy tone detection
0: Disabled
1: Enabled
2
International dial tone
detection
0: Disabled
1: Enabled
3
Country tone or IT.2
tone detection
0: Disabled
1: Enabled
4
System initialization
0: Disabled
1: Enabled
5
Scan threshold selection
0: Automatic
1: Manual (bit switch A)
6
Not used
7
PC I/F function
0: Disabled
1: Enabled
This function is only available in the following countries:
Austria, Belgium, Denmark, France, Ireland,
Netherlands, Norway, Portugal, Spain, Sweden, and
Switzerland
This function is only available in the following countries:
France, Netherlands, Norway, Spain, and Switzerland
This function is only available in the following countries:
Belgium, France, Spain, and Hungary
This function is only available in the following countries:
France, Sweden, and Hungary
Refer to section 4.2.13, SYSTEM INITIALIZATION.
Do not change the factory setting.
If this bit is set to 1, the bit switch A settings determine
the white and black threshold level.
Same as the Function 47 (PC IF Mode) setting
4-16
31 March, 1997
Comments
Advertisement
Table of Contents
