Table of Contents
Advertisement
31 March, 1997
— CONTACT IMAGE SENSOR (CIS) AND PAPER END SENSOR —
NOTE: The CIS and the paper end sensor are not available separately as
spare parts. Use this procedure only when the CIS or the paper end
sensor has been removed from the machine.
[D]
[A]
1. Remove the scanner and paper cassette assembly (see section 3.1).
2. Remove the CIS [A] (2 screws, 1 harness).
NOTE: When replacing the CIS [A], be sure that the dents [B] go into the
openings [C] in the CIS.
The upper front edge of the CIS [D] must not be lower than the CIS
frame surface. Otherwise, document jams occur at this point.
3. Remove the paper end sensor [E].
SCANNER AND PAPER CASSETTE
[E]
H905R517.cdr
6-11
[B]
[C]
Advertisement
Table of Contents
