Ricoh FAX680MP Service Manual page 37

31 March, 1997
BIT SWITCH 5
Bit Function
0 Modem types to be
notified to the
transmitting terminal
0: V29 & V27ter
1: V27ter
1 Paper length notified to
the transmitting terminal
0: Unlimited
1: A4
2 Available compression
methods
0: MR & MH
1: MH only
3 CNG transmission
0: Enabled
1: Disabled
Display priority between RTI & CSI
4    
0 1
 =  =
 
RTI ,
5
   
0 0
6 Receiving mode
0: Memory reception
1: Direct reception
7 Error line counter
decrement
0: Enabled
1: Disabled
The setting is mapped to the NSF/DIS frame.
The setting is mapped to the NSF/DIS frame.
The setting is mapped to the NSF/DIS frame.
Do not change the factory setting.
 
0
 =

RTI priority , CSI
 
1
If the machine doesn't have enough memory to handle
received data before starting a reception, — less than
35% free (no optional memory) or less than 10% free
(with optional memory) — then the machine normally
enters direct receiving mode.
But if this bit is set to 1, the machine is always in direct
receiving mode.
0: The line error counter decrements by 1 when 10
consecutive error free lines are received.
1: The line error counter does not decrement.
4-13
Comments
 
1
 =

, CSI priority
 
1
BIT SWITCHES