Ricoh FAX680MP Service Manual page 55

31 March, 1997
— ADF SENSOR ASSEMBLY AND SEPARATION PAD —
[A]
H905R503.cdr
1. Remove the ADF upper guide plate as explained in the previous section.
2. Slide out the separation pad assembly [A].
3. If required, adjust the separation pressure using the black pin [B] as shown.
The illustration shows the default setting. Push it in to increase the pressure.
4. Remove the sensor holder [C] (1 tapping screw), then replace the ADF sensor
assembly [D].
[D]
[C]
[B]
6-3
[A]
H905R505.cdr
EXTERIOR
4 notches