Compaq LTE Elite Maintenance And Service Manual page 350

9. Turn on external devices that are connected to the expansion base.
10. Be sure that A/B and C/D drive selection switches are correctly set
(Section C.3).
11. Turn the system on with the power switch on the computer or the power
switch on the expansion base.
NOTE: The first time you dock the Compaq LTE Elite in the expansion
base, you may be prompted to run Computer Setup to configure
optional devices.
configures many optional devices. In some instances you are
prompted to accept or reject a configuration change.
instructions on the screen to change the system configuration.
Refer to Section 6.7 for more information on running Computer
Setup.
12. To turn off the computer (but remain docked) use one of the following
methods:
o Save and close open files, then turn off the power switch on the
expansion base or the power switch on the computer.
o Enter Shutdown at the DOS prompt or select Shutdown from the Compaq
Utilities group box within Microsoft Windows, then save open files
The computer automatically detects and
Follow the