Compaq LTE Elite Maintenance And Service Manual page 362

To install the upgrade adapter on the Compaq LTE Lite Desktop Expansion
Base, complete the following steps:
1. Turn off the expansion base.
2. Remove the Compaq LTE Lite monitor support cover and extender panel if
installed.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To prevent possible damage to the expansion base and the upgrade adapter,
turn off the expansion base before connecting the upgrade adapter.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
3. Place the upgrade adapter on the flat surface of the expansion base in
front of the horizontal guide latches (Figure D-11).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To prevent possible damage to the connectors on the upgrade adapter and the
expansion base, apply equal pressure on both sides of the adapter and avoid
tilting the adapter as you slide it into the expansion base.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
4. Using both hands, slide the upgrade adapter straight back into the
expansion base until the 198-pin external options connector is fully
seated (Figure D-11).