Compaq LTE Elite Maintenance And Service Manual page 61

---------------------------------------------------------------------------
Screen is blank.
---------------------------------------------------------------------------
Display is blank
and the
power/standby LED
is flashing.
===========================================================================
Problem
===========================================================================
Screen is blank,
the power/standby
LED is flashing,
and the battery
LED is flashing.
incorrect.
QuickBlank is initiated.
-------------------------------------------------------
Another screen blanking
utility may be
installed.
-------------------------------------------------------
Screen save was
initiated by Power
Management due to lack
of user activity.
-------------------------------------------------------
If a color STN is used,
brightness/contrast
control slide needs
adjusting.
-------------------------------------------------------
Display (lid) switch is
stuck.
-------------------------------------------------------
Display has overheated.
System is in Standby.
Probable Cause
System has entered a
low battery Standby
condition. The computer
will next activate
Hibernation, if this
feature is not disabled.
Enter password to exit
QuickBlank.
Press any key and/or enter
password.
Press any key or click the
mouse.
Adjust the slide controls on
the right side of the
display for
brightness/contrast. *
Tap the switch.
If computer is in direct
sunlight, move it and allow
it to cool off.
Press the standby button to
exit Standby.
Solution(s)
If available, immediately
connect the computer to an
external power source or
insert a charged battery
pack. Then press the standby
button to exit Standby.
If another power source is
not immediately available
and Hibernation is disabled,
attempt to exit Standby and
save any open files.
However, the computer may
not have enough power to do
this.
If you have not disabled
Hibernation, the computer
automatically hibernates.
Do not interfere with the
computer while it is
entering Hibernation.
Once the computer has
turned off, insert a charged
battery pack, or connect the
computer to another power
source. Then turn the