Installing The Memory Expansion Board - Compaq LTE Elite Maintenance And Service Manual

Installing the Memory Expansion Board

To install the memory expansion board, complete the following steps:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
The two connectors on the memory expansion board are similar in appearance,
but they are keyed so you can only insert them in the proper manner. To
avoid damage to the system board or the memory expansion board, be sure
that you are aligning the correct connectors.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
1. Position the memory expansion board over the system board connectors,
ensuring that it is correctly oriented (Figure 4-4).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Do not apply pressure to the middle of the memory expansion board or you
may damage it. Press only in the area directly over the connectors. Ensure
that both connectors on the memory expansion board snap into place.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
2. Snap the memory expansion board into place by applying pressure directly
over each connector (Figure 4-4).
3. Replace the memory access cover by sliding it back into place
(Figure 4-4).