Compaq LTE Elite Maintenance And Service Manual page 52

6002 - xx Network card transmit
failed.
===========================================================================
Error Code Description
===========================================================================
6014 - xx Ethernet configuration
test failed.
6016 - xx Ethernet reset test
failed.
---------------------------------------------------------------------------
6028 - xx Ethernet internal
loopback test failed.
6029 - xx Ethernet external
loopback test failed.
1. Check interrupt type and
number setting.
2. Check media connection at
controller and MAU *.
3. Check media speed (4/16) and
type (UTP/STP **) settings.
4. Check MAU, cabling, or other
network components.
5. Replace controller.
Recommended Action
The following steps apply to
6014 - xx and 6016 - xx error
codes:
1. Run the ISA setup utility,
reconfigure the failing network
controller, and retest.
2. Ensure that the network
controller is seated properly,
if applicable.
3. Replace the network controller.
The following steps apply to
6028 - xx and 6029 - xx error
codes:
1. If using external loopback
plug(s), check that the correct
type of loopback plug is being
used.
2. If using external loopback
plugs, check that loopback plug
is connected to the correct
media connector at the rear of
the computer.
3. If using a live network for
this test, ensure that the
network, concentrators, and
cables are functional.
4. Run the ISA setup utility,
reconfigure the failing network
controller, and retest.
5. Ensure that any jumpers or DIP
switches on the controller
board are set to the correct
positions. (Refer to the
hardware documentation for
more information.)
6. If the network controller is a
stand-alone board, replace the
board.
7. If the network controller is
integrated into the expansion
base system board, replace the
expansion base system board.
8. If using multiple network
controller boards, attempt to