Running Computer Setup From A Compaq Lte Elite - Compaq LTE Elite Maintenance And Service Manual

Two horizontal guides [1] located at the front of the docking bay (Figure
6-17) help align the computer in the expansion base. The horizontal guides
engage in the grooves that are located between the upper and lower halves
of the computer [2]. The guides also prevent the computer from being
vertically removed while it is docked in the expansion base to prevent
damage to the connectors and to provide additional security.
6.7 Running Computer Setup
The first time you dock the computer in the expansion base or install
optional devices, the computer may detect a configuration change and prompt
you to run Computer Setup.
If you are using a Compaq LTE Elite in the SmartStation, run Computer Setup
from the computer hard drive. (Computer Setup resides in a hidden
partition.) If you are using a Compaq LTE Lite in the SmartStation, run
Computer Setup from the Compaq Diagnostics diskette included with the
SmartStation Adapter.

Running Computer Setup from a Compaq LTE Elite

If you are using a Compaq LTE Elite in the expansion base, run Computer
Setup by completing the following steps: