Changing The Scsi-2 Ddefault Configuration; Scsi Default Configuration - Compaq LTE Elite Maintenance And Service Manual

F.3 Changing The SCSI-2 Ddefault Configuration
By default, the integrated SCSI-2 controller has the configuration settings
listed in Table F-1. To adjust the default settings, refer to the Compaq
EZ-SCSI Software Reference Guide.
Table F-1. SCSI Default Configuration
===========================================================================
Parameter
===========================================================================
SCSI ID
Parity
Disconnect
Synchronous Negotiation
===========================================================================
IMPORTANT: If Parity, Disconnect, or Synchronous Negotiation is not
supported by a SCSI-2 device in the chain, you may want to leave
that feature disabled.
Value
7
Disabled
Disabled (no disconnect)
Disabled (do not attempt synchronous
negotiations)