o DC power to the computer when it is docked
o Ability to fast charge the battery pack in the computer whether the
expansion base is on or off
o Ability to fast charge an additional Compaq LTE Elite battery pack in the
SmartStation battery charging compartment
o Two full-sized slots for 8- or 16-bit Industry Standard Architecture
(ISA) expansion boards
o Two internal half-height drive bays
o Ability to start a docked Compaq LTE Elite computer from the computer's
hard drive or from an IDE hard drive in the expansion base
o An integrated SCSI-2 controller that supports up to seven SCSI-2 devices,
including one internal SCSI-2 drive
o An integrated Ethernet controller (with RJ-45 and AUI connectors)
o The following standard external device connectors:
- PS/2 mouse
- External keyboard (enhanced 101/102-key)
- External monitor
- Serial (RS-232C compliant)
- SCSI-2
- Ethernet AUI (IEEE 802.3 10BASE5 or 10BASE2 with optional Thinnet
Coax Transceiver)
- Ethernet RJ-45 (IEEE 802.3 10BASE-T)
- Parallel
NOTE: The parallel port is Centronics compatible, EPP 1.9 compliant,
when the Compaq LTE Elite is docked.
o A removable monitor support cover capable of supporting an external
monitor weighing up to 55 lb (25 kg)
o Horizontal guides, keylock assembly, and override blocker for securing
the computer to the expansion base
o Provision for an optional cable lock for securing the expansion base to a
stationary object
o Ability to use power conservation mode for IDE hard drives and Energy
Star compliant monitors (when used with Compaq LTE Elite computer only)