Compaq LTE Elite Maintenance And Service Manual page 55

---------------------------------------------------------------------------
xxxx - 18 No data detected.
---------------------------------------------------------------------------
xxxx - 21 Drive command aborted.
---------------------------------------------------------------------------
65xx - 24 Media hard error.
---------------------------------------------------------------------------
66xx - 24 Media hard error.
---------------------------------------------------------------------------
67xx - 24 Media hard error.
===========================================================================
Error Code Description
===========================================================================
xxxx - 30 Controller timed out.
---------------------------------------------------------------------------
xxxx - 31 Unrecoverable error.
---------------------------------------------------------------------------
xxxx - 32 Controller/drive
disconnected.
---------------------------------------------------------------------------
xxxx - 33 Illegal controller
command.
---------------------------------------------------------------------------
xxxx - 34 Invalid SCSI bus phase.
---------------------------------------------------------------------------
xxxx - 35 Invalid SCSI bus phase.
---------------------------------------------------------------------------
xxxx - 36 Invalid SCSI bus phase.
---------------------------------------------------------------------------
xxxx - 39 Error status from drive.
---------------------------------------------------------------------------
xxxx - 40 Target timed out.
---------------------------------------------------------------------------
xxxx - 41 SCSI bus stayed busy.
---------------------------------------------------------------------------
xxxx - 42 ACK/REQ lines bad.
---------------------------------------------------------------------------
xxxx - 43 ACK did not deassert.
---------------------------------------------------------------------------
xxxx - 44 Parity error.
---------------------------------------------------------------------------
xxxx - 50 Data pins bad.
---------------------------------------------------------------------------
xxxx - 51 Data line 7 bad.
---------------------------------------------------------------------------
xxxx - 52 MSG, C/D and/or I/O lines
bad.
---------------------------------------------------------------------------
xxxx - 53 BSY never went busy.
tape cartridge.
2. Replace tape drive.
Replace the indicated device.
Replace the indicated device.
1. Back up data and perform
Surface Analysis to
reallocate defect.
2. Replace drive.
1. Replace current DATA CD with
different DATA CD.
2. Replace drive.
1. Ensure correct media type
for this tape drive.
2. Replace current tape with
new tape.
3. Replace tape drive.
Recommended Action
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.
Replace the indicated device.