Table of Contents
Advertisement
To enable the Remote-Wake mode:
1
Use the left arrow or right arrow key to select the Power menu (refer to "Power Menu
Items").
2
Press the down arrow key to highlight the line Suspend Wakeup and press [ENTER] to
select the submenu.
3
Highlight the line Integrated Network and press [F7] or [F8] to change the setting to
[Enabled].
To enable the Remote-Power mode:
1
Use the left arrow or right arrow key to select the Power menu (refer to "Power Menu
Items" in this chapter).
2
Press the down arrow key to highlight the line Power-On and press [ENTER] to select the
submenu.
3
Highlight the line Network and press [F7] or [F8] to to change the setting to [Enabled].
4
To protect the remotely started PC from unauthorized use it is advisable to enable starting
with the keyboard locked.
5
It is also advisable to disable both Start from Flexible disk and Start from CD-ROM to
prevent the PC booting from any disk which may have been accidentally left in the drives.
a
Press [ESC], then use the left arrow or right arrow key to select the Security menu.
b
Press the down arrow key to hightlight the line Start-Up Center and press [ENTER] to
select the submenu.
c
Press the down arrow key to go to the Start from Flexible Disk line. Press [F7] or
[F8] to change the option to [Disabled].
d. Press the down arrow key to go to the Start from CD-ROM line. Press [F7] or [F8]
to change the option to [Disabled].
CONFIGURING THE PCI INTEGRATED ETHERNET INTERFACE
Configuration of the I/O Address, Hardware Interrupt, and DMA channel are made
automatically for the PH Enhanced PCI Ethernet interface.
Use SETUP to enable or disable the Enhanced PCI Ethernet interface.
To disable/enable the Enhanced PCI Ethernet interface:
1
Use the left arrow or right arrow key to select the Configuration menu (refer to
"Configuration Menu Items" in this chapter).
2
Press the down arrow key to highlight the line Integrated Network Interface and press
[ENTER] to select the submenu.
3
Press [F7] or [F8] to disable or enable the integrated Ethernet interface.
Enable or disable the interface as required.
Advertisement
Table of Contents
