Installing I/O Cards; Figure 2-75 Removing The T-15 Torx Screw And Bulkhead - HP VISUALIZE A6034 User Manual

WARNING
Figure 2-75
Opening Your Personal Workstation and Installing Accessories
Installing and Removing Accessory Boards

Installing I/O Cards

The procedure in this section explains how to install I/O cards in the I/O
card slots on the system board.
Turn the Personal Workstation off and unplug the power cord
before installing or removing I/O cards.
To install your I/O card, follow this procedure:
1. Remove the left-side panel as explained in the section "Removing the
Left-Side Panel" in this chapter.
2. Remove the T-15 Torx screw from the bulkhead as shown in Figure
2-75.
Removing the T-15 Torx Screw and Bulkhead
T-15 Torx
Screw
Bulkhead
112 Chapter 2