Power Supply - Canon imageFORMULA P-215II User Manual

Back View
(1) Rear Card Slot
When a plastic card is fed, a portion of the card protrudes from here
momentarily.
(2) Auto Start Switch
Use this switch to change the operation mode of the scanner.
(3) USB Connector
Connect the USB cable supplied with the scanner (or one that
supports Hi-Speed USB 2.0).
(4) Theft Prevention Hole (Security Slot)
Attach a key chain, etc. here to prevent the scanner from being
stolen.
(5) Power Connector
Connect a separately sold AC adapter (Japan only).
This scanner does not have a power switch. For details, "Power
Supply" on p.8

Power Supply

The power of the scanner is designed to turn ON when the feed tray
is opened or closed. To turn the power ON or OFF, operate the
scanner as described below.
Turning ON the Power
1
Raise the feed tray slightly while pressing the feed tray release lever.
8