Installing The Printer Driver To Windows - Canon imagePROGRAF W2200S Setup Manual

Installing the Printer Driver to Windows

A USB port can be connected with Windows XP, Windows 2000, Windows
Me, or Windows 98.
An IEEE1394 port can be connected with Windows XP, Windows 2000, or
Windows Me.
Important
z The USB port and IEEE1394 port cannot be used at the same time.
z If you intend to use the USB connection on a printer that is presently set up with a
parallel connection, you must do the procedure on the printer operation panel to
switch the printer interface setting to "USB". (
new printer, this procedure is not required because the printer interface is set for
"USB" before it is shipped from the factory.
z When the printer is connected to a Windows computer, use a computer equipped
with a PCI slot that is compatible with IEEE1394-1995 or IEEE1394-2000 (1394a)
standard OHC-I. The connection may not operate correctly with any other type
slot.
z If your are using Windows XP or Windows 2000, you must log in as a member of
the Administrators group.
z Do not connect the cable yet. If you connect the cable now, the printer driver will
not install correctly.
z Make sure that the printer is ON.
1
Mount the provided User Software CD-ROM in the CD-ROM drive.
Note
z If the AutoPlay function is switched off, double-click the My Computer icon on the
desktop, click the CD-ROM drive icon, and then from the File menu select
AutoPlay.
Æ
P.1-32) If you are installing a
Installing a Windows USB or IEEE1394 Connection
3-15