Software Installation; Installing The Printer Driver (Windows) - Canon iPF830 Series Basic Manual

iPF830 Series

Software Installation

Software Installation

Installing the Printer Driver (Windows)

Installing the Printer Driver (Windows)
Installing the Software
Installing the Software
The basic instructions for installing the software are as follows.
For detailed instructions, see the Setup Guide.
Supported connection methods
The printer driver works over USB or network (TCP/IP) connections.
The driver installation procedure varies depending on the type of connection.
Follow these steps to install the software.
Installing the Software (Windows)
•
When setting up a USB connection, connect the USB cable during printer driver installation following the instruc-
tions displayed.
Important
If you accidentally connect the USB cable first, the printer driver may not be installed correctly.
•
When the printer is connected to a network (via TCP/IP), the printer's IP address may be changed if you reinstall
the printer. In this case, be sure to reconfigure the printer's IP address.
1
Turn the computer on.
When setting up a TCP/IP (network) connection, after making sure the printer is on, connect the LAN cable
to the Ethernet port on the left side of the printer and to your network hub port.
2
Insert the provided User Software CD-ROM for the
appropriate operating system in the CD-ROM drive.
3
Follow the instructions displayed to complete instal-
lation.
Basic Guide
Installing the Software
79