Install The Ink Tanks - Canon imagePROGRAF W2200S Setup Manual

5 Install the Ink Tanks

After installing the printhead, install the 6 ink tanks:
Y (Yellow)
M (Magenta)
PM (Photo Magenta)
C (Cyan)
PC (Photo Cyan)
Bk (Black)
Important
z Before you use the printer the first time, you must install the ink tanks immediately
after installing the printhead. If the printer is switched off after installation of the
printhead without the ink tanks installed, the printer may not operate correctly even
if the ink tanks are installed after the printer is switched on again.
z If the printer is switched off after the printhead has been installed without the ink
tanks, press the Online button to set the printer offline then execute "Head
Cleaning C". (ÆUser's Guide, Chapter 7, "Cleaning the Printhead")
1
Open the right cover.
If the right cover is locked, press the Online button to turn off the Online
lamp and set the printer offline. Press the Ink Replace button to unlock the
right cover.
Y
M
PM
C
PC
Bk
1-17
5 Install the Ink Tanks