Software Installation Installing The Printer Driver (Windows) - Canon iPF6400S Basic Manual

iPF6400S Basic Guide
Software Installation
Installing the Printer Driver (Windows)
Installing the Software (Windows)
The basic instructions for installing the software are as follows.
For detailed instructions, see the Setup Guide.
Supported connection methods
The printer driver works over USB or network (TCP/IP) connections.
The driver installation procedure varies depending on the type of connection.
Follow these steps to install the software.
Installing the software
• When setting up a USB connection, connect the USB cable during printer driver installation
following the instructions displayed.
Important
If you accidentally connect the USB cable first, the printer driver may not be installed correctly.
• When the printer is connected to a network (via TCP/IP), the printer's IP address may be
changed if you reinstall the printer. In this case, be sure to reconfigure the printer's IP address.
1
Turn the computer on.
When setting up a TCP/IP (network) connection, after making sure the printer is on, connect the
LAN cable to the Ethernet port on the back of the printer and to your network hub port.
2 Insert the provided User Software CD-ROM for
the appropriate operating system in the
CD-ROM drive.
3 Follow the instructions displayed to complete
installation.
86