Confirm The Print Status Of The Printer - Canon imagePROGRAF W2200S Setup Manual

9 Confirm the Print Status of the Printer

Important
1
2
1-34
Setting Up the Printer
After the printer and computer have been prepared, print a Nozzle Check
pattern to confirm that ink is supplied correctly from each nozzle. Before
printing, load A4 or Letter size paper in Cassette 1.
z Always load A4 or Letter sized paper in Cassette 1. If a smaller size is loaded, it
may smear ink inside the printer and onto other media.
z You do not need to select the media size on the operation panel. The paper is force
fed from Cassette 1 to print the pattern.
Press the Power button to switch the printer on.
After a few seconds "Ready" is displayed in the operation panel and the
Online lamp lights.
Press the Online button to switch the Online lamp off.
The printer is set offline.
et Media
Cancel Job/
etup
Utility
Reset/Enter
Power
Online Ink Replace
Online Message
et Media
Cancel Job/
Utility etup
Reset/Enter
Power
Online Ink Replace
Online Message