Table of Contents
Advertisement
Installing a Macintosh Connection
Macintosh Software
TGARO Printer Driver
TGARO Printmonitor
TRemote UI
Important
3-34
Installing the Software
This chapter describes the computer software and settings required to use the
printer with a Macintosh computer. Do these procedures on all the
Macintosh computers.
The following software is provided for using the printer with a Macintosh
computer.
Software required for printing from a Macintosh. This must be installed on
every computer that will use the printer. The printer driver is used not only
for basic operation of the printer, you can also use the driver for many
functions such as setting preferences, adjusting color, and executing multiple
copy print jobs. The printer driver is on the provided User Software CD-
ROM for Mac OS 8.6/9.x and Mac OS X.
This software utility displays details about printer errors with a Macintosh.
This utility is installed automatically when the printer driver is installed.
Software that allows you to perform network information settings for the
printer, to display the current status of the printer, to cancel or temporarily
pause print jobs, or to display the print job history. This software utility is
built into the printer ROM. Use a Web browser from the computer to set the
printer IP address and to perform operation settings through the network.
(Æ Network Guide)
If the Remote UI is to be used, the IP address must be set on the printer.
z If you are using the Remote UI with Mac OS 8.6/9.x, open TCP/IP on the Control
Panel and make sure that Ethernet is selected for the Connect via.
Advertisement
Table of Contents
