Table of Contents
Advertisement
3 Connect the Power Cord
1
2
Important
1-10
Setting Up the Printer
After positioning the printer, follow this procedure to connect the power
cord.
Connect the power cord provided with the printer to the power
connector on the left side of the printer.
Plug the other end of the connector into the power source.
z When this printer is connected to the network, verify the status of its connection by
the lit LNK and 100 lamps, after turning the power on.
• If 10BASE-T is in use, LNK lamp (b) should light.
• If 100BASE-TX is in use, LNK lamp (b) and the 100 lamp (a) should light.
Advertisement
Table of Contents
