Canon imagePROGRAF W2200S Setup Manual page 67

16
Press or select the subnet mask digit to change then press
S u b n e t M a s k
= 0 . 0 . 0 . 0
The underscore (_) indicates the digit selected to change.
17
Press or to enter the subnet mask in use then press
: Press to increase the number one by one.
: Press to decrease the number one by one. The number after 0 is 255.
S u b n e t M a s k
= 2 5 5 . 0 . 0 . 0
The subnet mask value is set.
18
Repeat Step 16 and Step 17 to enter the subnet mask in use.
19
After entering the subnet mask, press
"Default G/W", then press
I P S e t t i n g
D e f a u l t G / W
20
Press or to select the digit to change the router IP address then
press .
D e f a u l t G / W
= 0 . 0 . 0 . 0
The underscore (_) indicates the digit selected to change.
, press
.
→
Doing the Settings on the Printer Operation Panel
.
.
or to select
2-13