SamplexPower Evolution Series Owner's Manual page 127

SECtION 4 |
DAtALoG tiMe AnD DAtALoG DiSABLe:
Set the time period of the data log.
0 = Disable
4 = 60 sec
Up Key x 4
SELECT GROUP
CHARGE CURVE
PARAMeteR SAVe
Save all parameters to SD Card. (see Details at Section 5)
Up Key x 4
SELECT GROUP
CHARGE CURVE
4.9 GRoUP 6 PARAMeteR SetUP: tiMe SettinG
Please refer to Parameter "TIME SETTING" under Group 6 at Fig 4.2. Set up details are given
below. The Date and Time Format is Year/Month/Day Hour:Minute (24 hour clock):
Up Key x 5
SELECT GROUP
CHARGE CURVE
i
inFo
• Time can be programmed from Year 2000 to 2099 only.
• Month can be programmed from 01 to 12 only.
• Day can be programmed from 01 to 31 only.
• Hour can be programmed from 00 to 24 only.
• Minute can be programmed from 00 to 60 only.
• If the numbers Entered for Month, Day, Hour and Minute are not within the above
ranges, message "OUT OF RANGE!" will be displayed and the display screen will
go back to the previously set time. Setting procedure will have to be re-started.
4.10 GRoUP 7 PARAMeteR SetUP: StoP SD CARD
Please refer to Parameter "STOP SD CARD" under Group 7 at Fig 4.2. Please note that this
set up is displayed / accessible only when SD Card is inserted in the SD Card Slot (9, Fig 1.1a).
Set up details are given below:
Once SD Card is being used, it should be removed/ejected only after the operation of the
Card has been stopped as shown below and mesage "Please remove SD Card" appears. If
the SD card is not removed within 30 sec, it will reset. After the card is removed, it reverts to
the original operating screen.
Up Key x 6
SELECT GROUP
CHARGE CURVE
Parameter Setup
1 = 1 sec
5 = 5 min
Enter Key
SELECT GROUP POWER SAVING
OTHER FUNCTION
Enter Key
SELECT GROUP POWER SAVING
OTHER FUNCTION
Enter Key
SELECT GROUP TIME SETTING
TIME SETTING 2000/01/01 00:00
Enter Key
SELECT STOP STOP SD CARD
SD CARD
2 = 10 sec
6 = 10 min
Up Key x 9
DATALOG TIME
1 = Enable 1 = 1 sec
Up Key x 10
PARAMETER SAVE
1 = Enable 0 = No
Up Key x 1
STOP SD CARD
0 = No
3 = 30 sec
Enter Key
KEY IN PASSWORD
0000
Password 8052
See Section 4.3.1
Enter Key
KEY IN PASSWORD
0000
Password 8052
See Section 4.3.1
Enter Key
Please remove
1 = Yes the SD Card
If SD Card is not
removed within 30 sec,
the unit will reset
SAMLEX AMERICA INC. | 37
APPENDIX A
DATALOG TIME
1 = 1 sec
PARAMETER SAVE
0 = No