SamplexPower Evolution Series Owner's Manual page 108

KEY IN PASSWORD
0000
PASSWORD CORRECT
SECtION 4 |
PASSWORD ERROR!!
BULK CURRENT
040 A
BULK CURRENT
!
90 A
SELECT GROUP
CHARGE CURVE
WRITING...
50 A
BULK CURRENT
SELECT GROUP
40 A
CHARGE CURVE
WRITE SUCCESS! SELECT GROUP
CHARGE CURVE 50 A
KEY IN PASSWORD
BULK CURRENT
0000
40 A
WRITE FAILURE!
BULK CURRENT
50 A
40 A
PASSWORD CORRECT
KEY IN PASSWORD
0000
OUT OF RANGE!
KEY IN PASSWORD
90 A
0000
PASSWORD ERROR!!
PASSWORD CORRECT
BULK CURRENT
PASSWORD CORRECT
50 A
BULK CURRENT
PASSWORD ERROR!!
40 A
PASSWORD ERROR!!
BULK CURRENT
SELECT GROUP
BULK CURRENT
!
90 A
CHARGE CURVE
40 A
BULK CURRENT
SELECT GROUP
40 A
CHARGE CURVE
WRITING...
BULK CURRENT
BULK CURRENT
SELECT GROUP
50 A
! 40 A
90 A
CHARGE CURVE
BULK CURRENT
BULK CURRENT
!
90 A
40 A
WRITE SUCCESS!
KEY IN PASSWORD
WRITING...
BULK CURRENT
50 A
0000
50 A
40 A
WRITING...
KEY IN PASSWORD
50 A
0000
WRITE FAILURE!
PASSWORD CORRECT
WRITE SUCCESS!
KEY IN PASSWORD
50 A
50 A
0000
WRITE SUCCESS!
PASSWORD CORRECT
50 A
OUT OF RANGE!
PASSWORD ERROR!!
WRITE FAILURE!
PASSWORD CORRECT
90 A
50 A
WRITE FAILURE!
PASSWORD ERROR!!
50 A
BULK CURRENT
BULK CURRENT
OUT OF RANGE!
PASSWORD ERROR!!
50 A
40 A
90 A
OUT OF RANGE!
BULK CURRENT
90 A
40 A
BULK CURRENT
BULK CURRENT
BULK CURRENT
!
90 A
50 A
40 A
BULK CURRENT
BULK CURRENT
50 A
!
90 A
WRITING...
BULK CURRENT
50 A
!
90 A
WRITING...
50 A
WRITE SUCCESS!
WRITING...
50 A
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
WRITE SUCCESS!
50 A
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
WRITE FAILURE!
90 A
50 A
OUT OF RANGE!
90 A
BULK CURRENT
OUT OF RANGE!
50 A
90 A
BULK CURRENT
50 A
All programmable parameters (Groups 1 to 7 in Parameter Menu Maps at Figs 4.1 and 4.2) BULK CURRENT
50 A
and their Default Values are described in Sections 4.1 to 4.8.
18 | SAMLEX AMERICA INC.
Parameter Setup
The first screen for BULK CURENT parameter setting appears as shown
on the left. The Default Value of 40A will be displayed as "040" using
3 digits. There will be a blinking cursor under the 1
1 digit ("0") will also blink. To change the setting to the new value of
st
50A, the 3 digits will have to be changed from "040" to "050" one
by one as follows:
• A s the 1 digit of the new setting "050" is "0", there is no need to
st
change this numerical value. Press the Enter Key MoMentARiLY
to select "0" for the 1
move to the 2nd digit "4". The 2
• P ress the Up Key to scroll the 2
MoMentARiLY to select "5" for the 2
will automatically move to the 3
be blinking.
• A s the 3rd digit of the new setting "050" is already "0", there is no
need to change this value. Now, the overall numerical value will be
"050". The cursor and "0" at the third digit will be blinking.
• P ress the Enter Key, HoLD for 3 to 4 sec and then release to
write the new value of 50A into the memory.
Writing to the inverter.
Flashes twice when writing is successful.
End of setting.
Press Back Key to go back to Group select or Up/Down key to the
next parameter.
An exclamation sign '!' is shown when the parameter is out of the
specified programming range. For example, if 90A was entered for
EVO-2224E (EVO-2224E range is 0-70A), it will be out of range and
an exclamation sign '!' will be displayed.
Flashes twice when there is a write failure.
Flashes twice when the set value is out of range. (90 A is out of range
for EVO-2224E).
digit. The blinking curser will automatically
st
digit "4" will be blinking.
nd
digit to "5". Press the Enter Key
nd
nd
digit "0". The 3rd digit "0" will
rd
APPENDIX A
digit ("0"). The
st
digit. The blinking curser