Linux Devices; Table 5-2 Linux Devices - SMART Embedded Computing ATCA-F125 Assembly, Installation And Use

U-Boot
Regardless which of the two boot flashes is selected as the currently active boot
device (using IPMI), the start address is always mapped to 0xE0000000.
5.7

Linux Devices

The following table lists all predefined Linux character devices and the respective memory
blocks which they are assigned to.
Table 5-2
Linux Device Name
/dev/mtd0
/dev/mtd1
/dev/mtd2
/dev/mtd3
/dev/mtd4
/dev/mtd5
/dev/mtd6
/dev/mtd7
/dev/mtd8
/dev/mtd9
/dev/mtd10
106
Linux Devices
Content
Kernel image
Empty
Kernel DTB
U-boot parameters
U-Boot image
Kernel image
Empty
Kernel DTB
U-Boot boot
parameters
U-Boot image
FPGA
ATCA-F125 (6873M Artwork) Installation and Use (6806800J94P)
Memory Area
0xE0000000 -
0xE05FFFFF
0xE0600000 -
0xE1EFFFFF
0xE1F00000 -
0xE1F1FFFF
0xE1F00000 -
0xE1F1FFFF
0xE2000000 -
0xE25FFFFF
0xE2000000 -
0xE25FFFFF
0xE2600000 -
0xE3EFFFFF
0xE3F00000 -
0xE3F1FFFF
0xE3F40000 -
0xE3F5FFFF
0xE3F80000 -
0xE3FFFFFF
-
Hardware Device
Active boot flash
Active boot flash
Active boot flash
Active boot flash
Active boot flash
Stand-by boot flash
Stand-by boot flash
Stand-by boot flash
Stand-by boot flash
Stand-by boot flash
-
U-Boot