SMART Embedded Computing ATCA-F125 Assembly, Installation And Use page 52

Controls, LEDs, and Connectors
Table 3-1
Label
H/S
T1/E1-1
T1/E1-2
MODE
LOCK
52
Face Plate LEDs (continued)
LED Color
Hot Swap Blue
ETH5 Activity Green
ETH5 Link Yellow
Telco Clock LED 2 Yellow
Green
Red
Telco Clock LED 4 Yellow
Green
Red
Telco Clock LED 1 Yellow
Green
Red
Telco Clock LED 3 Yellow
Green
Red
ATCA-F125 (6873M Artwork) Installation and Use (6806800J94P)
Function
FRU State Machine
During blade installation:
Permanently blue: On-board IPMC powered up
Blinking blue: Blade communicating with shelf
manager
OFF: Blade is active
During blade removal:
Blinking blue: Blade notifies shelf manager of its desire
to deactivate
Permanently blue: Blade is ready to be extracted
Blinking - Service Processor Ethernet port activity
10/100/1000 Ethernet link on service processor
Ethernet port
Loss of Signal
Status OK
Blinking - Initializing
Loss of Signal
Status OK
Blinking - Initializing
Slave Clock Generator
On - Master Clock Generator
Blinking - Stand alone Master
Blinking - Initializing
On - Hold over
Blinking - Free Run
Locked
Blinking - Initializing
Controls, LEDs, and Connectors