Standard Compliances; Table 1-1 Standard Compliances - SMART Embedded Computing ATCA-F125 Assembly, Installation And Use

Introduction
Stratum 3 Telecom clock options with master/slave sync and five inter-shelf sync

connectors on front panel along with 2 BITS/SSU front panel connectors
Synchronous Ethernet support

One AMC bay for application processor support

IPMC functionality for the board management by the Shelf Management Controller

1.2

Standard Compliances

This blade, when installed in a compliant shelf, meets the following standards.
Table 1-1
Standard
UL/CSA 60950-1 and 62368-1
EN 60950-1 and 62368-1
IEC 60950-1 and 62368-1 CB Scheme
ANSI T1.319-2002
NEBS GR-63-CORE
AT&T Document ATT-TP-76200
ETSI Acoustic Noise ETS 300 753 Class
3.1
ETSI Stationary Use: EN 300 019-2-3
Class 3.1
ETSI Storage EN 300 019-2-1 Class 1.2
ETSI Transportation: EN 300 019-2-2
Class 2.3
Telcordia GR-1089
Telcordia GR-1089-CORE
Telcordia GR-63-CORE
Telcordia SR-3580
30
Standard Compliances
ATCA-F125 (6873M Artwork) Installation and Use (6806800J94P)
Description
Legal safety requirements
ANSI Fire Spread Criteria
Network Equipment Power, Grounding, Environmental,
and Physical Design Requirements
ETSI acoustic noise requirements
ETSI stationary use requirements (temperature-
controlled locations
ETSI storage requirements in system level (not
temperature- controlled storage locations)
ETSI public transportation requirement on system level
Ports and Iitra-building lightning for telecommunication
port
Electromagnetic Compatibility and Electrical Safety -
Generic Criteria for Network Telecommunications
Equipment
NEBS Requirements: Physical Protection
NEBS Criteria Level 3
Introduction