Information Regarding The Usage In Explosive Atmospheres; Warranty - M&C SP Series Instruction Manual

5

Information regarding the usage in explosive atmospheres

The device can be operated in potentially explosive atmosphere of explosive zone 2.
Warning
6

Warranty

In case of a device failure, please contact immediately M&C or your M&C authorized distributor.
We have a warranty period of 12 months from the delivery date. The warranty covers only appropriately
used products and does not cover the consumable parts. Please find the complete warranty conditions
in our terms and conditions.
The warranty includes a free-of-charge repair in our production facility or the free replacement of the
device. If you return a device to M&C, please be sure that it is properly packaged and shipped with
protective packaging. The repaired or replaced device will be shipped free of delivery charges to the
point of use.
8
The Ex marking for the SP190-H/DIL-EX2 T* is:
II 3G Ex ec mc IIC T2/T3/T4 Gc
You will find a copy of the declaration of conformity in the appendix of this
instruction manual.
Follow closely all specified conditions and installation instructions
regarding the installation and operation of the sample probe. Only by
complying to all requirements, safe operation in explosive atmospheres is
ensured.
Any modification of the standard configuration of the sample probe with
parts, which are not approved by M&C and not explicitly specified for
usage in explosive atmospheres, will void the Type Examination
Certificate. This also refers to any repair work and service using parts
which are not M&C approved and not specified for usage in explosive
atmospheres.
Please don't hesistate to contact M&C or your M&C distributer if you
have any questions about parts, repair work and services of the SP190-
H/DIL-EX2 T*.
Protect yourself and others against damages which might be caused by
high voltage. Disconnect power supply before opening the device for
access. Make sure that all external power supplies are disconnected.
For devices with weather protection cover, the weather protection cover
may only be cleaned with a suitable damp cloth. Operation of the probe is
only possible with a weather protection cover.
Prevent electrostatic discharge during installation and operation! Avoid
buildup of electrostatic electricity caused by operation, maintenance or
cleaning of the device.
SP190-H/DIL-EX2 T* | 1.01.00 www.mc-techgroup.com