Gas Sample Probe Without Weather Protection Cover - M&C SP Series Instruction Manual

Gas Sample Probe Series SP
Dillution gas flow rate with injector
version I or II
Dilution gas pressure on inlet of
pressure controller
Process pressure
Errors caused by variation in process
temperature
Errors caused by over or under
pressure
Errors caused by variation in
atmospheric pressure
Ambient temperature
Ex standards used
Dimensions (W x H x D)
Weight
Option
Part No.: 02S9200
* Standard, other versions on request.Please specify dilution ratio with your order.
1) Values with injector I (higher dilution rates with injector II between 50:1 and 2000:1 possible),
At approx. 3 bar (downstream of supply pressure regulator) dilution gas,
2)
3) -5 % however, not for orifice 'g'
∆P und T at flow of:
90
∆P pressure loss with new filter element S-2K: 4
T time-with sample tube SP210/SS
90
Please note: Nl/h and Nl/min refer to the German standard DIN 1343 and are based on these standard conditions: 0 °C [32
°F], 1013 mbar.
8.2

Gas Sample Probe without Weather Protection Cover

Gas Sample Probe Series SP
Part No.
Weather protection cover with
insolation
12
® SP190-H/DIL-EX2
T2
I: 480 – 600 Nl/h*, optional for higher dilution rates
II: 1800-3000 Nl/h
Min. 4.5 bar g, max. 16 bar g
0.9 up to 2 bar abs.
No errors, operation is independent from process
temperature
No errors as long as the differential pressure ΔP at the
dilution unit is >0.5 bar g, and test gas is given to the probe
under process pressure conditions while there are no
pressure fluctuations present.
< 1 % at 50 mbar pressure variation
-25 to +60 °C [-13 to 140 °F]
EN 60079-0:2012 + A11:2013, EN 60079-7:2015, EN 60079-
18:2009
Dimensions of the weather protection cover: 207 x 260 x
345 mm [≈ 8.15" x 10.24" x 13.58"]
7.5 kg [≈ 16.53 lbs]
Insitu probe tube out of stainless steel 316Ti type SP210/SS,
connection G3/4" o, ø 10/12, length 1 m* [≈ 3.28 ft]*, incl.
flange gasket.
100
4.0
®
SP190-H/DIL-EX2
T2 X
02S1980
No
The probe can only be operated with the weather protection
cover provided by the customer.
SP190-H/DIL-EX2 T* | 1.01.00
SP190-H/DIL-EX2 SP190-H/DIL-EX2
T3
200 500
7 15
2.5 <1.0
SP190-H/DIL-EX2 SP190-H/DIL-EX2
T3 X
02S1985 02S1990
www.mc-techgroup.com
T4
Nl/h
mbar
Sec.
T4 X