Spare Parts And Consumables; Appendix - M&C SP Series Instruction Manual

22

Spare parts and consumables

The replacement interval for spare parts and consumables depends on the specific operating condition
of the probe. The quantities recommended in the following table are based on experience. Your
replacement intervals will be based on your operating conditions.
Gas sample probe SP190-H/DIL-EX2 T*
(C) Consumable parts
(R) Recommended spare parts
(S) Spare parts
Part No. Description
90S0015 Ceramic filter element S-2K, 2 µm, 75 mm [≈ 2.95"]
93S0045 Viton – flat gasket (30)
®
93S0020 O-ring lid sealing (39) Material: Viton
93S0025 O-ring lid sealing (55) Material: Viton
90S2080 Novapress
90S2077 Novapress
90S2075 Flange gasket set for DN65 PN6 B, consisting of
Novapress
93S1805 Min. temperature contact < 160 °C [< 320 °F]
92S1920 Complete dilution block for SP190-H/DIL-EX2 T*. Please
specify dilution ratio with your order.
93S4406 Dilution block for SP190-H/DIL-EX2 T* empty, no inserts,
material SS316
93S4401 Complete eductor unit SP190-H/DIL-EX2 T* incl. O-rings
and sample outlet tube
Viton ® is a registered trademark for f
Novapress ®
is a registered trademark for e
23

Appendix

Further product documentation is available on our home page:
http://www.mc-techgroup.com
Sample tubes series SP, Document: 2.14 and 2.15
•
Prefilter series SP, Document: 2.7
•
36
® gasket 3/4" (blue), max. 600 °C [1112 °F]
flange gasket DN65 PN6 (67 mm i.)
®
® gasket (67 mm i.) and screws set M12
luoropolymer elastomer by DuPont Performance Elastomers, USA.
lastomer-bonded gasket material by Frenzelit GmbH, Germany.
SP190-H/DIL-EX2 T* | 1.01.00
® .
.
®
Recommended amount
based on number of years
of operation [years]
C/R/S 1 2
C 6 12
R 4 8
R 2 4
R 2 4
R 1 2
R 1 1
S 1 1
R - -
www.mc-techgroup.com
3
18
12
6
8
3
1
1
1