Probe Design; Figure 3 Dimensions And Construction: Sp190-H/Dil-Ex2 T* With Weather Protection Cover - M&C SP Series Instruction Manual

12

Probe design

The diluted sample gas outlet at the probe is designed for a 8 mm (DN 6/8) tube.
The optional stainless steel sampling tube of one meter length (Part No.: 02S9200) can be connected
to the G 3/4" thread of the mounting flange. The maximum operating temperature of the stainless steel
sampling tube is 600 °C [1112 °F]. The modular design of our sample probes allows the usage of all
M&C sample tubes and prefilters with G 3/4" connection thread. This guarantees an optimum adaptation
to the process conditions.
The following cross-sectional drawing shows the probe SP190-H/DIL-EX2 T* with weather protection
cover and fixed mounted junction box.
Figure 3 Dimensions and construction: SP190-H/DIL-EX2 T* with weather protection cover
The following figure shows the probe SP190-H/DIL-EX2 T* X without weather protection cover and
with loose wired junction box.
www.mc-techgroup.com SP190-H/DIL-EX2 T* | 1.01.00 19