Header Angle - MacDon R85 Operator's Manual

OPERATING THE HEADER

6.6 Header Angle

Header (or cutterbar) angle can be varied from 0–8° below horizontal.
Choose an angle that maximizes performance for your crop and field conditions.
A flatter angle provides better clearance in stony conditions while a steeper angle is required in down crops for better
lifting action.
The header angle may be hydraulically adjusted from
the windrower cab using the hydraulic cylinder (A)—if
equipped—without shutting down the windrower.
Refer to your MacDon self-propelled windrower
operator's manual.
Figure 6.15
79
169455 Rev. E