Safety Signs; Installing Safety Decals - MacDon R85 Operator's Manual

1.7 Safety Signs

• Keep safety signs clean and legible at all times.
• Replace safety signs
become illegible.
• If original parts on which a safety sign was installed are
replaced, be sure the repair part also bears the current
safety sign.
• Safety signs are
Parts Department.

1.7.1 Installing Safety Decals

To install a safety decal, follow these steps:
1. Be sure the installation area is clean and dry.
2. Decide on the exact location before you remove the decal backing paper.
3. Remove the smaller portion of the split backing paper.
4. Place the sign in position and slowly peel back the remaining paper, smoothing the sign as it is applied.
5. Small air pockets can be smoothed out or pricked with a pin.
169455
that are missing
available from your
SAFETY
or
Dealer
Figure 1.17: Read Operator's Manual before
Operating
8
Rev. E