MacDon R85 Operator's Manual page 60

7. Move windrower left side (cab forward) platform (A) to
OPEN position.
8. Connect single hose (B) from header to coupler (A) on
middle valve block.
9. Remove caps and plugs on hoses from windrower and
lines on header.
10. Connect the three hoses from windrower to the fittings
on the header as shown.
11. Connect electrical harness from windrower to electrical
connector on header.
169455
OPERATION
Figure 5.50
Figure 5.51
C - Pressure
E - Case Drain
52
D - Return
Rev. E