MacDon R85 Operator's Manual page 50

1. Move windrower left side (cab-forward) platform (A) to
OPEN position.
2. Route the hose bundle (A) from the header, under
the windrower frame and insert pin (B) into hole in
windrower frame.
3. Place hoses on support (C).
4. If optional couplers and lock are installed on hoses and
lines, proceed as follows. Otherwise, proceed to step
12., Attaching the Header (M205 Windrowers), page
44.
169455
OPERATION
Figure 5.26
Figure 5.27
42
Rev. E