Setump; Secfgsb1 - Broadcom 5720ZG User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
Description:
Saves the modified UMP Configuration Table to the network adapter's non-volatile memory
and exists.
3 Exit without Saving
Description:
Exits without saving any changes to the UMP Configuration Table.
10.212

setump

cmd: setump
Description: Enable/Disable UMP
Syntax: setump
Options:
-d
-e
10.213

secfgsb1

cmd: secfgsb1
Description: Configure Selfboot NVRAM Group 1
Syntax: secfgsb1
Options:
-m Mac address xx:xx:xx:xx:xx:xx
-v Vendor ID
-z Vendor Device ID
-s SubSystem Vendor ID
-i SubSystem Device ID
-w Magic Packet WOL 1: Enable 2: Disable
-o Limit WOL Speed to 10 0: No 1: Yes
-l Design Type 0: NIC 1: LOM
-p Enable Phy Auto Power Down 0: No 1: Yes
-r Reversed Nway 0: No 1: Yes
Disable UMP
Enable UMP
page 135
Broadcom Confidential and Proprietary