Broadcom 5720ZG User Manual page 60

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
c. Custom PCI power....: Yes (comsumed D0:100.D3:10 dissipated D0:100.D3:10)
d. Custom PCIE power...: Yes (3.3v, Sustained, D0, 1.2 Watt...)
e. Custom VPD-R Data...: Yes
g. Cable Sense.........: Disabled
h. MBA CFG Data........: Enabled
x. Save & exit
----------------------------------------------- LED Mode (option b)-----------------------------------------_
-> b
Selfboot LED Mode selection
0. Mac Mode
1. Phy1 Mode
2. Phy2 Mode
3. Shared Traffic/Lik LED Mode
4. Shasta MAC mode
5. Wireless Combo Mode
----------------------------------------------- Custom PCI power (option c)----------------------------------------
-> c
Selfboot PCI Power Consumption/Dissipate value
1. Use system default
2. Costom define
-> 2
D0 State Power Comsumed decimal value (0-255) (100)->100
D3 State Power Comsumed decimal value (0-255) (10)->10
D0 State Power Dissipated decimal value (0-255) (100)->100
D3 State Power Dissipated decimal value (0-255) (10)->10
--------------------------------------------
-> d
Selfboot PCIE Power Budgeting Data
1. Use system default
2. Costom define
-> 2
0. Data0: 3.3v, Sustained, D0, 1.2 Watt
1. Data1: 3.3v, Maximum, D0, 1.4 Watt
2. Data2: 3.3v, Maximum, D3, 0.6 Watt
3. Data3: 3.3v, PME Aux, D3, 0.4 Watt
4. Data4: Unused
5. Data5: Unused
6. Data6: Unused
7. Data7: Unused
Custom PCIE power
page 51
Broadcom Confidential and Proprietary
(option d)----------------------------------------