Table of Contents
Advertisement
2
Model: SMX-AUS Series Details
Panel Variants (SKU Number)
915-200-103
915-200-203
2.1 Replaceable Chassis Details
The panel chassis can be replaced. For more details, refer to chapter 7, "Replacing the Panel Chassis".
Panel Variants (SKU Number)
915-200-103
915-200-203
2.2 Specifications
Dimensions (L x B x H)
:
Color
:
Mounting Holes
:
Knock outs
:
:
:
2.3 Standard Features
Following are the standard features of the fire alarm control panel according to AS 7240.2-2004:
5.5
Battery function check according to AS 7240.4-2004
7.8
Output to fire alarm devices
7.9.1
Output to fire alarm routing equipment
7.9.2
Alarm confirmation input from fire alarm routing equipment
7.10.2
Outputs to fire protection equipment (Output Type B)
7.10.4
Fault monitoring of fire protection equipment
7.11
Delays to outputs
7.12.1
Dependencies on more than one alarm signal (Type A)
NS-MN-0030 / 11.2020
Number of Loops
Number of Devices Supported
Sensors: 99
1
Modules: 99
Total loop devices: 198
Sensors per loop: 99
Modules per loop: 99
2
Total devices per loop: 198
Total devices for 2 loops: 396
Replaceable Chassis Sub-assembly (SKU Number)
315-650
315-651
478 x 231 x 750 x (mm)
Grey & Black
4
Top 25mm – 10 / 50mm - 5
Back 25mm – 2 / 50mm - 4
Bottom 25mm – 2 / 50mm - 5
Address Range
1 - 99
101 - 199
1 - 99
101 - 199
Loop and Devices Support
This panel supports 1 loop and 198 devices
This panel supports 2 loop and 198 devices each
Operating temperature
:
Relative Humidity
:
Material
:
IP Rating
:
Operating Voltage
:
Stand-by Batteries
:
7.12.2
Dependencies on more than one alarm signal (Type B)
7.12.3
Dependencies on more than one alarm signal (Type C)
8.0
Supervisory Signal Condition
9.3
Fault signals from points
9.9
Output to fault warning routing equipment
10.0
Disablement Condition
10.5
Disablement of each addressable points
11.0
Test condition
Installation Guide SMX-AUS
0 ... 40 °C
93 % ± 2 %.
CRS
IP30
230 V AC, 50 / 60 Hz AC
2 x 26 Ah
7
Advertisement
Table of Contents
